PLANET PL-510W - Manual (Page 42)

200M Powerline Wireless N Extender
PL-510W
40
7.3 Restore to Factory Default Settings
Click the "Restore to Factory Default" button to reset Device to factory default
settings.
1. Device will restart automatically after reset.
2. You can also reset Device by pressing the WPS/RST button on its back panel
for 6-10 seconds. When wireless LED and WPS LED display a blinking light, it
indicates that Device is successfully reset to factory default settings.
7.4 Change Password
This section allows you to change login password and user name for accessing
Device’s Web-based utility.
New User Name Enter a new user name.
New Password Enter a new password.
Confirm New
Password
Re-enter the new password for confirmation.
Click "Save" and your settings will be activated.