PLANET ICA-HM830W - Manual (Page 5)

5
ICA-HM830 Bottom Panel:
DC 12V
MICRO SD
1 2 3 4 5 6 7
AUDIO OUT
RJ 45
AUDIO I N
DC 12V
RJ-45
MICRO SD
Audio Out
Audio In
GPIO
Interface Description
Power Jack
The input power is DC 12V, 2A.
Note: ONLY use package power adapter supplied with the
internet. Otherwise, the product may be damaged.
RJ-45 LAN socket
Connect to PC or Hub/Switch.
For connect to 10Base-T Ethernet or 100Base-TX Fast
Ethernet cabling. This Ethernet port built auto-negotiation
protocol can detect or negotiate the transmission speed
of the network automatically. Please use CAT-5 cable to
connect the Network Camera to a 100Mbps Fast Ethernet
network switch or hub.
Note: ONLY use one power source, either from DC or from
802.3af Power over Ethernet.
MicroSD Card
Slot The IP Camera has built-in a MicroSD card slot accepts
MicroSD memory card for image / video event recording.
Audio Out
Connect a loud speaker to the IP Camera. This is for voice
alerting and two-way audio.
Audio In Connect a microphone to the IP Camera.
GPIO
The 7 pin terminal block includes 4 input ports and 1
output ports.