PLANET VC-201A - Manual (Page 19)

1
3. Installing and Using VDSL Converter
3.1 Install the Ethernet Over VDSL2 Converter
The Ethernet Over VDSL2 Converter does not require any
software configuration. Users can immediately use any feature
of this product simply by attached the cables and plug power
on. There is some key limitation on the Ethernet Over VDSL2
Converter. Please check the following items:
The device is used for Point-to-Point connection only (Master
device to Slave device) and allows data and voice work on
the same telephone lines.
VC-201A / VC-204 two RJ-11 connectors for VDSL port. One
for voice device connection (like telephone) and the other one
for network link connection.
Depending on the quality of telephone line, the maximum
distance of one VDSL segment is 2.0km (6560ft) with AWG
24 telephone wires.
The distance will change by the quality of telephone wires.
l
l
l
l