2 stand-alone installation – PLANET GT-1205A User Manual
Page 9

9
Port-1 1000Base-X SFP slot
l
Port-2 1000Base-X SFP slot
l
Port-3 10/100/1000Base-T copper connector
l
Rear Panel
One DC jack for DC
l
5V / 2A power input.
3.2 Stand-alone Installation
GT-1205A is with high reliability and flexibility to extend the
distance up to 550m and 10/15/20/30/40/50/60/70/120km. It
depends on the 1000Base-SX / LX SFP transceiver modules. The
SFP transceiver is hot-pluggable and hot-swappable. You can
plug-in and out the transceiver to / from any SFP port without
having to power down the converter.
To install a GT-1205A stand-alone, on a desktop or shelf, simply
complete the following steps:
Step 1: Turn off the power of the device/station in a network
to which the GT-1205A will be attached.
Step 2: Ensure that there is no activity in the network.
Step 3: Slot in the 1000Base-X SFP. Make sure both side of
the SFP transceiver are with the same media type,
for example: 1000Base-SX / 550m multi-mode to
1000Base-SX / 550m multi-mode, 1000Bas-LX / 10km
single mode to 1000Base-LX / 10km single mode.