PLANET VIP-1010PT - Manual (Page 22)

High Definition PoE IP Phone (1-Line)
VIP-1010PT
- 22 -
incoming and hold the current talking. During the conversation, user can alternate
between Headset, Handset and Hand-free by pressing the corresponding keys.
Note: The will flash during the Incoming interface
3.3 Mute
User can press the Mute key to make the user NOT be heard by the other party,
but user can hear the other party. Icon will be shown on the LCD, and press the
Mute key again to recover.
3.4 Call Hold / Resume Forward
1. Press the Hold button or Hold soft key to put user active call on hold.
2. If there is only one call on hold, press the hold soft key to retrieve the call.
3. If there is more than one call on hold, press the line button, and the Up/Down
button to highlight the call, and then press the Resume button to retrieve the call.
3.5 DND (Do Not Disturbed)
If user enables the DND mode, the phone will reject to answer all calls automatically
and play busy tone; the UI will present missed calls at the same time.
3.6 Call Waiting
To configure Call Waiting via Phone interface:
1. Press Menu -->Features-->Call Waiting-->Enter, ;
2. Use the Left or Right key to activate or deactivate call waiting.
3. Then press the Save key to save the changes.