PLANET IVS-2120 - Manual (Page 50)

Industrial Internet Video Server
User’s Manual of IVS-2120
6.2.3. PTZ Setting
This page allows user to modify the RS485 interface according to the P/T scanner.
Camera Protocol
This device can connect to a PTZ camera or speed dome camera and
controls them thru RS-485 interface.
Camera Address
This is the camera ID set in PTZ camera or speed dome camera.
Please DO NOT change the default value if
unnecessary. If so, user needs to check and set value
properly for both sides.
Baud Rate
If user needs to change these parameters, he needs to check and set
value properly for both network module and P/T scanner.
Please DO NOT change the default value if
unnecessary. If so, user needs to check and set value
properly for both sides.
OSD Control Choose the corresponding model for OSD control
OSD Open Control commands for Open function.
OSD Close Control commands for Close function.
OSD Select Control commands for Select function.
OSD Back Control commands for Back function.