PLANET POE-150 - Manual (Page 14)

10 11
Figure 6: Connection architecture over POE-150/150S
4.4 Connect with 802.3af devices
The above two sections describe the connection of using POE-
150 and POE-150S as a pair. However, due to the capability of
IEEE802.3af, POE-150 can directly connect with any IEEE802.3af
end-nodes like Wireless Access Point, VoIP phones, Internet
Camera where support 802.3af In-line power Ethernet port.
Please find the figure below for the connection.
Figure 7: Connection to 802.3af device
Once POE-150 detects is the existence of an IEEE802.3af device,
the LED indicator will be steady ON to shows it is providing
power.
G
Hint
If the connected device is not fully comply
ing with IEEE802.3af, say, a proprietary in-
line power device, the LED indicator of POE-
150 will not be steady on.
The POE-150S can also provide the alternative way to make the