PLANET POE-150 - Manual (Page 11)

6 7
Chapter 4
Hardware Installation
4.1 Prior Installation
Before your installation, it is recommended to check your network
environment. If there is problem for you to install a networked
device where it is very difficult to find a power socket for your
AC-DC Adapter, POE-150 and POE-150S should provide you a
way to provide DC power for this Ethernet Device conveniently
and easily.
The POE-150 comes with an AC-DC adapter with 48VDC output
and injects this DC power into the un-used pin of the twisted pair
cable (pair 4, 5 and pair 7, 8).

NOTE:
1. Power over Ethernet (POE-150 and POE-
150S) will only work under Category 5
UTP/STP cable with 4-pair. Please refer to
appendix A for more.
2. Gigabit Ethernet device cannot be used to
work with POE-150 and POE-150S since
1000Base-T will use the 4-pair for data
transmission (refer to appendix A). Co-
work with POE-150/150S, the speed will
change to 100Mbps follow the port’s auto-
negotiation.
The POE-150S separates the power out and will provide three
kind of power output by different model,, i.e. 5VDC/2A (model:
POE-150S-5V), 9VDC/ 1.3A (model: POE-150S-9V) and 12VDC/
1A (model:POE-150S-12V).