PLANET ICA-4200V - Manual (Page 52)

Full HD 20M IR Vari-Focal Dome IP Camera
ICA-4200V
Dayl ing ight Sav
Offset
Set up the date of daylight saving offset.
3.7.3 Maintenance
Recall the device hard factory default settings. Note that
Default Settings (Including the
click this button will reset all devices’ parameters to the
network setting)
factory settings (including the IP address).
The unit is restarted and most current settings are reset to
Default Settings (Except the
factory default values. This action will not reset the
network setting)
network setting.
To take a backup of all of the parameters, click this
button. If necessary, it will then be possible to return to the
Backup Setting
previous settings if settings are changed and there is
unexpected behavior.
Click the “Browse” button to locate the saved backup file
Restore Setting and then click the “Restore Setting” button. The settings
will be restored to the previous configuration.
Firmware Upgrade The device supports new firmware upgrade.
1. Close all other application programs which are not
necessary for firmware update.
2. Make sure that only you access this device at this
moment
3. Disable Motion Detection function.
4. Select “ Firmware name”
5. Select the Firmware binary file.
52