PLANET ICA-4200V - Manual (Page 17)

Full HD 20M IR Vari-Focal Dome IP Camera
ICA-4200V
3. Set the mounting base onto ceiling and center it through the mounting hole, using the
two retaining screws for the main body, supplied by the appurtenance bag.
4. To adjust lens, move the camera body by pan and/or tilt manually and set the
zoom/focus by turning the lens to the left or right direction.
5. Connect the LAN cable to Ethernet’s switch or hub and the DC-Jack to the power
source.
Use the power adapter, 12V DC, included in the package and connect it to
wall outlet for AC power. And connect the other cables and connectors if
necessary.
6. When the camera cabling is completed, close the top cover dome housing and
secure it by two screws. And then adjust PIR sensor to proper position. Once the
PIR sensor is well-positioned, secure it by two screws.
7. Done
2.3 Initial Utility Installation
This chapter shows how to quickly set up your IP camera. The camera is with the default
17