PLANET ICA-3350P - Manual (Page 58)

3 Mega-pixel Remote Focus Bullet IR IP Camera
ICA-3350P
58
3.5.15 Maintenance
You are able to upgrade firmware or reset this device to default setting on this page.
Reboot
Click this button to reboot the IP camera. This function is useful when
you find IP camera is not working properly.
Restart IP Camera
Automatically
The device will reboot automatically according to the schedule. Please
make sure the Time setting is correct when this function is enable.
Reset
(1) Clear all settings of IP camera and reset to factory default setting.
(2) Reset all parameters, except for the IP, time zone, and daylight
saving parameters, to the original factory settings
Backup Back up IP camera’s setting and save it on your computer.
Back up to SD Card
Device
Back up IP camera’s setting and save it on SD card.
Restore
Restore a previously-saved configuration file saved on your computer.
Click ‘Browse’ button to select the configuration file first and then click
‘Restore’ button to upload settings.
Please make sure you select the correct configuration file
before you restore settings. If you upload wrong file, the
device might be damaged.
Restore from SD Restore IP camera’s configuration which is previously-saved on SD