PLANET ICA-3350P - Manual (Page 12)

3 Mega-pixel Remote Focus Bullet IR IP Camera
ICA-3350P
12
2.1.2 Identification of ICA-3350P cable
Interface Description
1 - RS-485 & digital I/O
+ : RS485+
- : RS485-
1 : DO
2 : GND
3 : DI
2 - Power DC power input, connect to AC power adapter
3 - Reset
Reset IP cam to default setting
User could follow the steps to restore the device to factory
default setting:
1. Power on the camera and wait a while until the boot
procedure finish.
2. Press the hardware reset button over 10 seconds, and
release it.
3. Camera will reboot and restore to factory default setting.
4 - Audio output
Connects to external audio amplifier or speakers with built-in
amplifier. May require appropriate audio jack converter
(depends on the type of amplifier / speaker you’re using).
5 - Audio input
Connects to audio peripheral for audio input, like
microphone or other audio devices
6 - Ethernet (POE supported)
Connects to your local area network by Ethernet cable.
Orange LED : Power on.
Green LED: Ethernet cable is connected.
7 - TV output Connects to TV
ONLY use package power adapter supplied with the Internet. Otherwise, the
product may be damaged.
2.2 Hardware Installation
2.2.1 Physical Installation
1. Connecting an Ethernet cable
Connect the LAN cable on the camera to PC.