PLANET EPN-102 - Manual (Page 13)

13
2.3 Verifying the Installation
After power on the ONU, the Power LED will be bright and system starts to boot. When
system is ready, the PON LED will be flash.
If the PON connection is normal, the PON LED will be off and Link LED is ON. And then you
can enjoy the high bandwidth connection via PON technology.
Note:
The PLANET GEPON Solution based on the Teknovus GEPON Technology. The ONU
was designed with PLANET OLT EPL-4000 system. If you connect to third party OLT
system, even the OLT is Teknovus solution; the PON connection still might be unstable
and malfunction, that because the configurations of ONU must depend on the OLT
settings. If the ONU can’t work properly with other brand OLT, please make sure your
PON system and contact the third party OLT vendor for technical support.