PLANET GSW-4804SF - Manual (Page 18)

User’s Manual of GSW-4804SF
-18-
3.3 Reset to Factory Default Mode under Console Interface
Once, lose or forget the current IP address or login username / password. Once the terminal has connected to the Switch,
power on the Switch, the terminal will display that is perform the loading GSW-4804SF program procedures. When the
“ Waiting 2 seconds : Press for default parameters” text appears, please press “d” from your keyboard then the Switch
will perform the reset device to factory default mode procedure and the screen appears in Figure 3-1 .
Figure 3-1 Loading Default Parameters of GSW-4804SF
#
Notice:
This Console interface only provide reset system to factory default mode, for further switch
management. Please access GSW-4804SF Web interface for further management.