PLANET GSW-4804SF - Manual (Page 107)

User’s Manual of GSW-4804SF
-10
4. Click the “Add/Modify” button to create new VLAN groups with VID=2 and VID=3.
5. At the Port 1- VLAN Port configuration page, select VLAN 2 and VLAN 3 to add to the Port 1. The right information window
at this table shows the status. The screen in Figure B-4 appears.
Figure B-4 Assign Port-1 to be VLAN 2 and VLAN 3 member.
6. After the down the Port 1 VLAN configuration, press “close” to back to the 802.1Q VLAN main screen. And check if the
setting be applied to Port 1 at the “Egress Policy” column. The screen in Figure B-5 appears.
Figure B-5 Port 1 VLA N status