PLANET LRP-822CS - Manual (Page 7)

7
5. Configuring IP Address via the Console
The LRP Managed Switch is shipped with default IP address as follows:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
use the procedures as follows:
 Show the current IP address
1. At the “LRP-series#” prompt, enter “show ip”.
2. The screen displays the current IP address, Subnet Mask and Gateway as shown
in Figure 5-1.
Figure 5-1: IP Information Screen
 Configuring IP address
3. At the “LRP-series#” prompt, enter “configure”.
4. At the “LRP-series (config)#” prompt, enter the following command and press
as shown in Figure 5-2.
LRP-series (config)# ip address 192.168.1.100 mask 255.255.255.0
LRP-series (config)# ip default-gateway 192.168.1.254