PLANET LRP-822CS - Manual (Page 17)

17
10. Recovering Back to Default Configuration
 IP Address has been changed or admin password has been
forgotten –
To reset the IP address to the default IP Address “192.168.0.100” or reset the
login password to default value, press the hardware reset button on the front
panel for about 10 seconds. After the device is rebooted, you can login the
management Web interface within the same subnet of 192.168.0.xx.
1 2 3 4 5 6 7 8
ACT LNK
1000
GE2
GE1
GE4
GE3
GE2
GE1
GE4
GE3
FAN 3
PWR
FAN 1
FAN 2
Alert
LRP-822CS
8-Port Long Reach PoE + 2-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
Console
115200, N, 8, 1
RESET
SYS
PWR
PoE In-Use
LNK
The LRP interface is
allowed to connect to
LRP Extender only.
CAUTION
Figure 10-1: LRP-822CS Reset Button
LRP-1622CS
2
1
4
3
6
5
8
7
10
9
12
11
14
13
16
15
ACT LNK
1000
LNK
GE2
GE1
GE4
GE3
GE2
GE1
GE4
GE3
FAN 1
PoE PWR
FAN 3
FAN 2
Alert
Console
115200, N, 8, 1
RESET
SYS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
PWR
The LRP interface is
allowed to connect to
LRP Extender only.
CAUTION
Figure 10-2: LRP-1622CS Reset Button