PLANET LRP-822CS - Manual (Page 6)

6
4. Logon to the Console
Once the terminal is connected to the device, power on the LRP Managed Switch,
and the terminal will display “running testing procedures”. Then, the following
message asks to log-in user name and password. The factory default user name
and password are shown as follows, and the login screen in Figure 4-1 appears.
Username: admin
Password: admin
Figure 4-1: LRP Managed Switch Console Login Screen
The user can now enter commands to manage the LRP Managed Switch. For a
detailed description of the commands, please refer to the following chapters.
Note
1. For security reason, please change and memorize the new
password after this first setup.
2. Only accept command in lowercase letter under console
interface.