PLANET GSD-808HP2 - Manual (Page 16)

16
2.6 Power over Ethernet Powered Device
3~5 Watts
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other
Ethernet/non-Ethernet end-devices to the central where UPS
is installed for un-interrupt power system and power control
system.
6~12 Watts
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory,
Warehouse can install the Access Point any where with no
hesitation.
10~12 Watts
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP
Camera without limits of install location – no need electrician
to install AC sockets.
3~12 Watts
PoE Splitter
PoE Splitter split the PoE 52V DC over the Ethernet cable
into 5/12V DC power output. It frees the device deployment
from restrictions due to power outlet locations, which
eliminate the costs for additional AC wiring and reduces the
installation time.
3~25 Watts
High Power PoE Splitter
High PoE Splitter split the PoE 52V DC over the Ethernet
cable into 24/12V DC power output. It frees the device
deployment from restrictions due to power outlet locations,
which eliminate the costs for additional AC wiring and
reduces the installation time.
30 Watts
High Power Speed Dome (Without heater)
This state-of-the-art design is considerable to fit in various
network environments like traffic centers, shopping malls,
railway stations, warehouses, airports, and production
facilities for the most demanding outdoor surveillance
applications - no need electrician to install AC sockets.
Note
Since the GSD-808HP / GSD-808HP2 per PoE port supports 52V
DC PoE power output, please check and assure the Powered Device
(PD) acceptable DC power range is from 52V DC. Otherwise, it will
damage the Powered Device (PD).