PLANET GSD-808HP2 - Manual (Page 10)

10
 Per PoE Power Usage (Unit : %) (Lower LED to upper LED)
LED Color Function
25% Orange Lights to indicate the system has 25% PoE power usage.
50% Orange Lights to indicate the system has 50% PoE power usage.
75% Orange Lights to indicate the system has 75% PoE power usage.
95% Orange
Lights and blinks to indicate the system has 95% PoE power
usage.
2.2 Rear Panel
The rear panel of the GSD-808HP / GSD-808HP2 indicates an AC inlet power
socket, which accepts input power from 100 to 240V AC, 50-60Hz, 1.5A (GSD-
808HP) / 1.25A (GSD-808HP2) and has a fan hole on the rear panel.
100~240V AC
50/60Hz
ON
OFF
POWER
Figure 2-3: GSD-808HP / GSD-808HP2 Switch Rear Panel
Power
Notice
The device is a power-required device, it means, it will not work till
it is powered. If your networks should active all the time, please
consider using UPS (Uninterrupted Power Supply) for your device.
It will prevent you from network data loss or network downtime.
In some area, installing a surge suppression device may also help
to protect your GSD-808HP / GSD-808HP2 from being damaged by
unregulated surge or current to the GSD-808HP / GSD-808HP2 or
the power adapter.
Before start up
Before your installation, please refer to the followings for your cabling:
10/100/1000Base-T
All 10/100/1000Base-T ports come with Auto-Negotiation capability. They
automatically support 1000Base-T, 100Base-TX and 10Base-T networks. Users only
need to plug a working network device into one of the 10/100/1000Base-T ports,
and then turn on the GSD-808HP / GSD-808HP2. The port will automatically runs
in 10Mbps, 20Mbps, 100Mbps or 200Mbps and 1000Mbps or 2000Mbps after the
negotiation with the connected device.