PLANET FNSW-2401CS - Manual (Page 6)

- 6 -
2. HARDWARE DESCRIPTION
This product provides two different running speeds – 10Mbps, 100Mbps in the same switch and automatically distinguishes
the speed of incoming connection.
This section describes the hardware features of FNSW-2401CS. For easier management and control of the Switch, fa-
miliarize yourself with its display indicators, and ports. Front panel illustrations in this chapter display the unit LED
indicators. Before connecting any network device to the FNSW-2401CS, read this chapter carefully.
2.1 Front Panel
The Front Panel of the FNSW-2401CS Web Smart Fast Ethernet Switch consists of 24x Auto-Sensing 10/100Mbps
Ethernet RJ-45 Ports and one 100Base-FX fiber module slot; the LED Indicators are also located on the front panel of the
FNSW-2401CS.
Figure 2-1: FNSW-2401CS Switch front panel
2.1.1 LED indicators
System
LED Color Function
PWR Green Lights to indicate that the Switch has power.
Per 10/100Mbps port
LED Color Function
LNK/ACT Green Lights to indicate the link through that port is successfully established.
100 Orange Lights to indicate the port is running in 100Mbps speed.
#
Notice:
Press the RESET button for 5 seconds. The FNSW-2401CS will back to the factory default mode; the entire configuration
will be erased.
2.2 Rear Panel
The rear panel of the FNSW-2401CS indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz.
100-240V AC
50/60Hz
Figure 2-2: FNSW-2401CS Switch rear panel
Power Notice:
1. The device is a power-required device, it means, it will not work till it is powered. If your networks should active all the
time, please consider using UPS (Uninterrupted Power Supply) for your device. It will prevent you from network data loss
or network downtime.
2. In some area, installing a surge suppression device may also help to protect your FNSW-2401CS from being damaged
by unregulated surge or current to the FNSW-2401CS.