PLANET FNSW-2401CS - Manual (Page 4)

- 4 -
1.3 Features
Complies with IEEE 802.3 and IEEE 802.3u standards for 100Base-TX/FX
24-Port 10/100 Mbps Fast Ethernet Switch
Each Switching ports support auto-negotiation-10/20, 100/200Mbps supported
One open slot for 100Base-FX fiber-optic interface with various connection media
Auto-MDI/MDI-X detection on each RJ-45 port
Prevents packet loss with back pressure (half-duplex) and 802.3x PAUSE frame flow control (full-duplex)
High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates
erroneous packets to optimize network bandwidth
4K MAC address table, automatic source address learning and ageing
Embeds 1.5MB packet buffer
Web interface for Switch basic management and setup
Support 24 Port-based VLAN function
Supports up to 2 Trunk groups, each trunk with up to 4 ports with 800Mbps bandwidth
Supports rate control and IEEE 802.1p QoS on each port
Port Mirroring support for dedicated port monitoring
Broadcast storm control and aging time setting
Firmware upgrade through web interface
EMI standards comply with FCC, CE class A
1.4 Specification
Product
FNSW-2401CS
24-Port 10/100Mbps + 1-Slot Web Smart Fast Ethernet Switch
Hardware Specification
Ports 24 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports
Module Slot 1 for 100Base-FX module
Switch Processing Scheme Store-and-forward
Throughput (packet per second) 3.72Mpps
Switch fabric 5Gbps
Address Table 4K entries
Share data Buffer 1.5MB
Flow Control Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
Dimensions 440 x 120 x 44 mm, 1U height
Weight 1.6 kg
Power Requirement 100~240 VAC, 50-60 Hz
Power Consumption / Dissipation 13.2 Watts maximum / 45 BTU/hr maximum
Temperature Operating: 0~50 degree C, Storage -40~70 degree C
Humidity Operating: 10% to 90%, Storage: 5% to 95% (Non-condensing)
Smart function