PLANET FNSW-2401CS - Manual (Page 14)

- 14 -
4-4 Port Trunk Setup
This section allows you to disable or enable trunk function of two ports or four ports together to speed up data transmission.
The screen in
Figure 4-6 appears.
Figure 4-6 FNSW-2401CS Port Trunk Setup Web Page screen
#
Notice:
After turn on the port trunk feature, port 1 and port 2, port 1,2,3,4 or port 5,6,7,8 should connect to another
switch, such as another FNSW-2401CS, that also supports port trunk feature to double the bandwidth in
between. Otherwise, if the connected switch do not support port trunk, it will cause network loop and hangs the
whole network.