PLANET FGSW-2620CS - Manual (Page 6)

User’s Manual of FGSW-2620CS
1. INTRODUCTION
1.1 Checklist
Check the contents of your package for the following parts:
 FGSW-2620CS x 1
 Quick Installation Guide x 1
 User's Manual CD x 1
 Power Cord x 1
 Rubber Feet x 4
 Two Rack-mount Brackets with Attachment Screws x 1
If any of these pieces are missing or damaged, please contact your dealer immediately; if possible, retain the carton
including the original packing material, and use them again to repack the product in case there is a need to return it to us
for repair.
In the following section, the term “Web Smart Switch” means the FGSW-2620CS whereas the term “switch” can be
any third switches.
1.2 About the Switch
The FGSW-2620CS provides 24 10/100Mbps Fast Ethernet ports and two Gigabit Ethernet ports, either TP or
SFP per port. The two Gigabit ports either can be 1000Base-T for 10/100/1000Mbps or 1000Base-SX/LX
through SFP (Small Factor Pluggable) interfaces. The distance can be extended from 100 meters (TP), and
550 meters (Multi-mode fiber), up to above 10/20/30/40/50/70/120 kilometers (Single-mode fiber).
The FGSW-2620CS is equipped with non-blocking 8.8Gbps backplane, greatly simplifies the tasks of up-
grading your LAN for catering to increasing bandwidth demands.
For efficient management, the FGSW-2620CS 24-Port 10/100Mbps + 2 Gigabit TP / SFP Combo Web Smart
Switch is equipped with remote Web interface. The FGSW-2620CS can be programmed for advanced switch
management functions such as port configuration, port-based / IEEE 802.1Q / MTU VLAN, port mirroring, port
trunk, QoS, bandwidth control, broadcast storm control, STP, RSTP, configuration backup/recovery, MAC
address / TCP & UDP filter and IGMP Snooping v1/v2.
The FGSW-2620CS provides port-based / IEEE 802.1Q / MTU VLAN (port based / IEEE 802.1Q VLAN in-
cluding overlapping). The VLAN groups allowed on the FGSW-2620CS, will be maximally up to 26 for
port-based / 32 for IEEE 802.1Q VLAN groups. Also the MTU VLAN divides port 1 to port 24 as separate LAN
group and only can access the public port 25,26 or port 26. Via supporting port trunking, the FGSW-2620CS
allows the operation of a high-speed trunk combining multiple ports. The FGSW-2620CS also provides two
groups of up to 4-ports 10/ 100Base-TX trunk support, up to 800Mbps bandwidth per trunk and 1 group of
2-Port 10/100/1000Mbps trunk support, up to 2000Mbps bandwidth per trunk, and it supports fail-over as well.
With its Auto-Negotiation capability, all the RJ-45/UTP ports of Web Smart Switch can be configured to speeds
of 10/20Mbps / 100/200Mbps (Fast Ethernet) and 1000/2000Mbps (Gigabit Ethernet) automatically. In addi-
tion, the products are equipped with the MDI/MDI-X auto detection for easily plug and play connection,
regardless of cabling types -- straight-through or crossover.
- 6 -