PLANET FGSW-2620CS - Manual (Page 51)

User’s Manual of FGSW-2620CS
 Trunk Setting
This function allows to configure the trunk function. It provides up to two trunk groups and each trunk group provides 4
member ports. It also provides four various Trunk Hash Algorithm policies for selection as the screen in Figure 4-37 ap-
pears and Table 4-17 describes the Trunk Setting objects of Web Smart Switch.
Figure 4-37 Trunk Setting Web Page Screen
The page includes the following fields:
Object Description
 System Priority
A value which is used to identify the active LACP. The Managed Switch with the
lowest value has the highest priority and is selected as the active LACP peer of
the trunk group.
 Link Aggregation
Algorithm
Provides different algorithm methods of link aggregation. The available options
are shown below:
MAC Src&Dst
MAC Source
Default mode is MAC Src&Dst.
 Member
Allows to click specific port as member port from different link groups.
Default link group 1 includes P1, P2, P3, P4.
Default link group 2 includes P5, P6, P7, P8.
- 51 -