PLANET FGSW-2620CS - Manual (Page 43)

User’s Manual of FGSW-2620CS
Figure 4-28 Remove specified ports from VLAN 1 member
It’s important to remove the VLAN member port from VLAN 1 group or else the
ports would become overlapping setting.
3. Assign PVID for each port:
Port-1,Port-2 and Port-3 : PVID=2.
Port-4,Port-5 and Port-6 : PVID=3.
Port-7~Port-24 : PVID=1.
4. Enable VLAN Tag for specific ports
Link Type: Port-3 (VLAN-2) and Port-6 (VLAN-3).
The Per Port VLAN configuration in Figure 4-29 appears.
- 43 -