2 rear panel – PLANET FGSD-910HP User Manual
Page 10

10
Per 10/100Mbps Port
LED
Color
Function
LNK/ACT
Green
Light: Indicates the link through that port is successfully
established at 10/100Mbps full duplex mode.
Blink Slowly: Indicates the link through that port is
successfully established at 10/100Mbps
half duplex mode.
Blink Fast: Indicates that the switch is actively sending
or receiving data over that port.
PoE
Orange
Light: Indicates the port is providing 48V (FGSD-910P) /
56V (FGSD-910HP) DC in-line power.
Per 10/100/1000Mbps Port
LED
Color
Function
Speed
Green
Light: Indicates the link through that port is successfully
established at 1000Mbps.
Blink Slowly: Indicates the link through that port is
successfully established at 100Mbps.
Off: Indicates the link through that port is successfully
established at 10Mbps.
LNK/ACT
Green
Light: Indicates the link through that port is successfully
established.
Blink: Indicates that the switch is actively sending or
receiving data over that port.
2.2 Rear Panel
The rear panel of the PoE Ethernet Switch indicates an AC inlet power socket,
which accepts input power from 100 to 240V AC, 50-60Hz, 2A (FGSD-910P) or
100 to 240V AC, 50-60Hz, 2.5A (FGSD-910HP).
100~240V AC
50/60Hz, 2A max.
Figure 2-3: FGSD-910P Switch Rear Panel