Avago Technologies 3ware 9550SXU-4LP - Manual (Page 5)

www.3ware.com 1
Chapter 1. Installing an
AMCC 3ware 9550SX
RAID Controller
This document describes the physical installation of the AMCC
3ware 9550SX RAID controllers. It contains the following topics:
„ “Before You Begin” provides important information about
things you should consider before starting installation, and
tools and equipment you will need.
„ “Safety Factors” describes important precautions for your
personal safety and to protect your equipment and data. Be sure
to read this section.
„ “Installing a Serial ATA RAID Controller” and “Installing a
9550SX RAID Controller with Multilane
Internal Connectors”
provide step-by-step instructions for
installing a Serial ATA RAID controller.
„ “Finishing Up” describes the final steps required when
installing a serial controller.
Before You Begin
Contents of Package
„ 3ware 9550SX RAID controller
„ SATA interface cables, one for each port on the controller
Note: With the exception of the 9550SX-16ML RAID
controller, which ships with a multilane break-out cable (SFF-
8087), multilane controllers (such as the 9550SX-12MI,
9500S-12MI, and 9500S-8MI) do not ship with cables.
Multilane cables are sold separately.
„ This document, 3ware 9550SX Serial ATA RAID Controller
Quick Install Guide