beautypg.com

Avago Technologies 3ware 9550SXU-4LP User Manual

Page 34

background image

Chapter 2. Installing the Battery Backup Unit

30

3ware 9550SX Serial ATA RAID Controller Quick Install Guide

b

Press down gently on the battery module until the bottom
clip snaps into place in the lower hole.

3

Insert the battery power connector into the power receptacle on
the BBU.

Note:

The battery will drain if it is plugged in and

there is no power to the unit. If the system will not
be used right away, wait to do this step until the
system is ready for use.

Figure 29. Battery power connector inserted in power receptacle

The controller is now ready to install in your system.

Figure 23 shows the BBU fully installed on 3ware controllers.

This manual is related to the following products: