A.3.14.4 sample output, A.3.15 help, A.3.15.1 command line – Avago Technologies SAS 9300-4i Host Bus Adapter User Manual
Page 42: A.3.15.2 parameters, A.3.15.3 program return value, Help
LSI Corporation
- 42 -
SAS-3 Integrated RAID Solution User Guide
November 2012
Appendix A: Using the SAS-3 Integrated RAID Configuration Utility
Commands
A.3.14.4
Sample Output
Following is an example of the output of the BOOTENCL command, showing an enclosure:bay value as the primary
boot device, after it was selected with the BOOTENCL command. The format and fields in the output vary depending
on the types of installed controllers.
------------------------------------------------------------------------
Enclosure information
------------------------------------------------------------------------
Enclosure# : 1
Logical ID : 50000000:80000000
Numslots : 8
StartSlot : 0
Enclosure# : 2
Logical ID : 70000000:6546343f
Numslots : 38
StartSlot : 0
Primary Boot Slot : 2
------------------------------------------------------------------------
A.3.15
HELP
The HELP command displays usage information for the command specified in the input parameter.
A.3.15.1
Command Line
sas3ircu help <commandname>
A.3.15.2
Parameters
<commandname> – The name of a supported SAS3IRCU command.
A.3.15.3
Program Return Value
0x00
SUCCESS: Command completed successfully.
0x01
FAILURE: Bad command-line arguments or operational failure.