Avago Technologies SAS 9200-8e Host Bus Adapter - Manual (Page 9)

Avago Technologies
- 9 -
LSI SAS 9200-8e PCI Express to 6Gb/s SAS HBA User Guide
October 2014 Revision History
6. Secure the bracket to the system’s chassis. Install the bracket screw, if applicable, or engage the system
retention mechanism to secure the LSI SAS 9200-8e HBA to the system’s chassis.
7. Connect serial cables between the HBA and any serial HDDs and external enclosures. Connect serial cables
between the LSI SAS 9200-8e HBA and any HDDs or external enclosures.
Figure 2 shows the locations of the LSI
SAS 9200-8e HBA connectors.
8. Replace the cover and any power cords, and power up the system. Replace the chassis’s cover, reconnect any
power cords, and reconnect any network cables. Turn on the power.
The installation of your LSI SAS 9200-8e HBA is complete.
8 Revision History
8.1 Version 1.1, October 2014
Made the following changes:
 Updated Operating System Support URL.
 Converted the book to the new template.
8.2 Version 1.0, July 2011
Initial release of the document.