Avago Technologies SAS 9200-8e Host Bus Adapter - Manual (Page 7)

Avago Technologies
- 7 -
LSI SAS 9200-8e PCI Express to 6Gb/s SAS HBA User Guide
October 2014 Electrical and Environmental Specifications
 J3: 4-pin, right angle, 0.1-in. pitch pin header for driving external activity LED
 J4 and J5: SFF-8088 mini-SAS, external, right-angle connectors
 J7: PCIe x8-lane board edge connector
 TP2: UART connection
6 Electrical and Environmental Specifications
The design and implementation of the LSI SAS 9200-8e HBA minimizes electromagnetic emissions, susceptibility to
radio frequency energy, and the effects of electrostatic discharge. The board carries the CE mark, C-Tick mark,
Canadian Compliance Statement, Korean KCC, Taiwan BSMI, Japan VCCI, and FCC Class B, and it is marked with the FCC
Self-Certification logo. The board also meets the requirements of CISPR Class B.
6.1 Electrical Characteristics
The maximum power requirements for the LSI SAS 9200-8e HBA under normal operation are as follows:
 PCIe 12.0 V = 0.74 A
 Power
— Nominal = 7.92 W
— Worst Case = 13.20 W
 Operation range = 0 °C to 55 °C (32 °F to 131 °F)
6.2 Thermal and Atmospheric Characteristics
The atmospheric characteristics for the LSI SAS 9200-8e HBA are as follows:
 Temperature range: 0 °C to 55 °C (32 °F to 131 °F) (dry bulb)
 Relative humidity range: 5 percent to 90 percent noncondensing
 Maximum dew point temperature: 32 °C (89.6 °F)
The following parameters define the storage and transit environment for the LSI SAS 9200-8e HBA:
 Temperature range: 45 °C to +105 °C (−49 °F to +221 °F) (dry bulb)
 Relative humidity range: 5 percent to 90 percent noncondensing
6.3 Safety Characteristics
All LSI SAS 9200-8e HBAs meet or exceed the requirements of UL flammability rating 94V-0. Each bare board is marked
with the supplier’s name or trademark, type, and UL flammability rating. Because these boards are installed into a PCIe
bus slot, all voltages are less than the SELV 42.4-V limit.