Avago Technologies SAS 9200-8e Host Bus Adapter - Manual (Page 6)

Avago Technologies
- 6 -
LSI SAS 9200-8e PCI Express to 6Gb/s SAS HBA User Guide
October 2014 LSI SAS 9200-8e HBA Characteristics
Activity LED Header (J3). The LSI SAS 9200-8e HBA has a 4-pin, right-angle, 0.1-in. pitch header for driving external
activity LEDs. The 4-pin header connects to two LEDs, which indicate SAS activity on Port 0 and Port 1.
UART Connector (TP2). The UART connector debug port requires a special cable and LSI support to gather detailed
Input/Output Controller (IOC) status.
5.3 Physical Characteristics
The LSI SAS 9200-8e HBA is a 6.6-in. x 2.713-in., low-profile board. The component height on the top and bottom of
the LSI SAS 9200-8e HBA is in accordance with the PCIe specification. The following figure shows the
board
connectors.
Figure 1 LSI SAS 9200-8e HBA Board Layout
Table 3 LSI SAS 9200-8e LED Header Pinout
Pin Function
1 3.3 V
2 Port 0
3 Port 1
4 3.3 V
Table 4 LSI SAS 9200-8e UART Pinout
Pin Function
1 UART0_TX
2 Gnd
3 UART0_RX
4 3.3 V
LSISAS2008
J4
Port 1
J7
TP2
J3
3_00003-03
J5
Port 0