Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 49)

LSI Corporation
- 49 -
MegaRAID SAS Device Driver Installation User Guide 
June 2014
Solaris 10 x86, Solaris 11, and Solaris Express x86 Driver Installation
Contents of the Driver Distribution
Chapter 8: Solaris 10 x86, Solaris 11, and Solaris Express x86 Driver
Installation
This chapter describes how to use the mrsas Driver Package Update to install the LSI MegaRAID controller driver for
the Solaris OS. The following topics are documented:
 Contents of the driver distribution
 Supported hardware
 Supported operating system
 Installing the driver package during OS installation
 Installing or upgrading the driver package after OS installation
 Removing the driver package
 Notes
NOTE Section 8.4, Installing the Driver Package During OS Installation
(Solaris10 OS, x86 Only)
, and Section 8.5, Installing the Driver Package
during OS Installation (Solaris11 OS, x86 Only) , apply to x86
architecture only. The other sections apply to both x86 architecture
and SPARC architecture.
8.1 Contents of the Driver Distribution
The driver distribution contains the following files
 README – Driver readme file
 mr_sas.img – 3.5-in. 1.44-MB diskette image
 mr_sas.iso – CD-ROM image
 mr_sas.tar.Z – Package image
8.2 Supported Hardware
This driver supports the following LSI MegaRAID controllers:
 The 2108-based family of MegaRAID controllers
 The 2208-based family of MegaRAID controllers
 The 3108-based family of MegaRAID controllers