Avago Technologies Cache Protection for RAID Controller Cards User Manual
Page 7
LSI Corporation
- 7 -
MegaRAID CacheVault Flash Module 02 Quick Installation Guide
March 2012
MegaRAID CacheVault Flash Module 02 Quick Installation Guide
Attaching the CVFM02 Module to a RAID Controller and Connecting It to a CVPM02 Module
on a Remote Mount Board
Attaching the CVPM02 Module to the Clip on the Remote Mount Board
Follow these steps to attach the CVPM02 module to the clip on the remote mount board.
1.
Make sure the remote mount board is on a flat, clean, static-free surface. Ground yourself, and make sure that the
system is grounded.
2.
Remove the CVPM02 module from the package.
3.
Press the CVPM02 module into the clip on the remote mount board until the module clicks firmly into place, as
shown in the following figure.
Figure 4 Connecting the CVPM02 Module to the Clip on the Remote Mount Board
CacheVault
Power Module
Clip
3_01275-00