Epson R-D1s - Manual (Page 46)

46 Appendix
Optical System
Display Functions
Viewfinder Indicators
Power Supply
JPEG compression ratio: Locked at 1/4
PRINT image matching: Supports PRINT Image Matching III
Image sensor: Primary-color filter CCD
(APS size: 23.7 × 15.6 mm)
Pixels: 6.1 M
Lens mount: EM mount (M-type bayonet mount; L-type
screw mount with an optional adapter
ring)
Viewfinder: Real image range finder type see-through
viewfinder
Viewfinder magnification: 1.0x
Rangefinder: Combined coincidence-type
(interlocking range: 0.7 m to infinity)
Rangefinder baseline
length:
38.2 mm
Visual field frame: 28/35/50 mm bright frame switching, auto
parallax compensation
Frame coverage: 85% (at 3 m)
Shutter: Electronically controlled vertically
traveling focal plane shutter
Shutter speed: 1/2000–1 sec, bulb
Flash: Synchronous: 1/125 sec or slower
Supported only in synchronized shooting
Metering: TTL screen surface direct actual-aperture
center-weighted averaged metering
Exposure control: Automatic exposure (AE) with aperture
priority and AE-lock/manual
Exposure compensation
range:
+/-2.0EV in 1/3EV steps (AE mode only)
ISO sensitivity: 200/400/800/1600
35 mm equivalent focal
length multiplier:
1.53x
LCD monitor: Type 2 low-temperature polysilicon color
LCD
235 K pixels
Status gauge: Analog needle indicators
Shutter speed: 1/2000–1 sec. (flashing metered/lit: set on
dial)
Bright-line frames: for 50/28/35 mm lenses
Battery type: Lithium-ion
Model: EU-85
Output voltage: 3.7 V
Capacity: 1500 mAh