Inserts, Input, Group – Euphonix MC Control User Manual

Page 34: User guide surface controls 34

professional control surface

Artist Series

USER GUIDE

SURFACE CONTROLS

INSERTS

Pressing the

INSERTS key displays the inserts knob set for editing plug-ins. The

first plug-in is displayed on the knob. Pressing one of these Knob Tops displays
the first eight plug-in parameters for editing. Pressing a plug-in’s Knob Top
displays its parameters for editing.

Press the

EQ key to display the EQ knob set to configure equalization controls

and filters. This shows four EQ bands on eight knobs.

AUX

Press the

AUX key to display the Aux knob set to control auxiliary sends. The first

aux send is displayed. Up to eight aux sends can be shown at once.

PAN

Press the

PAN key to display the Pan knob set to configure left/right or surround

panning. The left/right pan control is typically displayed. The first page of eight
pan knobs is shown.

INPUT

Press the

INPUT key to display the Input knob set to configure input routing, mic

gains, phantom power, and other application-specific parameters.

DYN

Press the

DYN key to display the Dynamics knob set to configure compressors,

limiters, expanders, and gates.

GROUP

Press the

GROUP key to display the Group knob set to configure group bus routing

or control group (VCA) membership.

MIX

Press the

MIX key to display the Mix knob set to configure output routing.