Adjusting the display, Adjusting the projection size, Setting the focus – Epson ELPLP29 User Manual
Page 24: Adjusting the projection size setting the focus, Focus ring, P.23, Buttons

23
Adjusting the Display
Adjusting the projection size
The size of the projected image is basically determined by the
distance from the projector to the screen.
A
Press the [Wide] or [Tele] buttons on the control panel
to adjust the projection size.
[Wide] : increase the size
[Tele] : reduces the size
If you would like to enlarge the image further, move the projector
further away from the screen.
Setting the focus
A
Turn the focus ring to adjust the image focus.
p
• The default setting is wide.
• The E-Zoom function lets you enlarge parts of the image.
p
• If the surface of the lens is dirty, or misted over as a result
of condensation, it may not be possible to adjust the focus
correctly. If this happens, clean or de-mist the lens.
• If the projector is positioned outside the normal projecting
range of 87-1109 cm (2.9-36.4 ft.), it may not be possible to
obtain the correct focus. If you have trouble obtaining the
correct focus, check the projection distance.