Whelen SAK11 User Manual

Au to mo tiv e: sirens & switches, Au tom o tive : sirens & switches, Caution

Page 1

Installation Guide:

SA315 Speaker Bracket

2002 Trailblazer

ENGINEERING COMPANY INC.

Internet: www.whelen.com
Sales e-mail: [email protected]
Canadian Sales e-mail: [email protected]
Customer Service e-mail: [email protected]

For warranty information regarding this product, visit www.whelen.com/warranty

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: (860) 526-9504

Fax: (860) 526-4078

tiv

Sirens & Switches

Installation:

Secure the speaker to
the bracket using the
supplied mounting
hardware (see next
page).

On the lower radiator
support, find the
existing holes shown in
Figure 1. Using the
supplied mounting
hardware, mount the
bracket (with speaker
attached) to the lower
radiator support as shown in Figure 2.

Installation is complete and the speaker is ready to connect to power. Extend the
WHITE (Positive) and BLACK (Negative) speaker wires to your siren amplifier and
connect as shown in the amplifiers instructions.

NOTE: The bracket can be mounted to either side of the vehicle. Mounting is
identical, except the bracket will face the opposite way.

FRAME

RAIL

MOUNTING

HOLES

SIREN

Fig. 1

Fig. 2 Passenger Side

RADIATOR

SUPPORT

FRONT TIRE

CAUTION

Loud siren noise can cause

hearing damage and/or loss.

Refer to OSHA Section 1910.95 prior

to putting ANY siren into service!

Wear

Protection!

ACTIVATION OF THIS

SIREN MAY DAMAGE

UNPROTECTED EARS!