Rose Electronics QuadraVista HDMI - Manual (Page 90)

86 Installation and Operations Manual
•
Group/Module/Window Assignment (GGMMPP) = is comprised of
six Arabic numerals. This is used in designating the device’s
Group/Module/Window Assignment.
•
Group = is comprised of the first two numbers, “00” is the fixed value.
•
Module = is comprised of the middle two numbers, “00” is the fixed
value.
•
Window Assignment = is comprised of the last two numbers (01 –
04), “00” is used to pertain to all window assignments.
•
Parameter 1 of color assignment (RRRGGGBBB) = is comprised of
nine Arabic numerals, this is used to designate the color.
•
Parameter 2 of on / off switch = “1” signifies ON while “0” signifies
OFF.
The following is a list of available ASCII Z commands:
ZA
Format:
ZA GGMMPP [NByN(2,3,……)] [Nth(1,2,……)]
Function: to set the automatic arrangement of windows.
Examples: ZA 000000 2 1
Set all windows to a 2×2 map position 1,2,3,4 (quad).
ZA 000002 3 2
Place window 2 to a 3×3 map position 2.
ZA 000000 6 13
Place all windows to a 6×6 map position 13,14,15,16.
ZA 000000
Automatically arrange all windows to the optimum size and
position.
ZC
Format:
ZC GGMMPP B[order]/L[abel] RRRGGGBBB (red ratio 000 –
255, green ratio 000- 255, blue ratio 000 - 255) (NoDimColor)
Function: to set the border of the window (with / without dimming effect)
and label’s background color.
Description: B[order] to signify the border of the window.
L[abel] to signify the label’s background color.
[NoDimColor] to signify the border’s dimming effect. You can
add
[NoDimColor] to remove the border’s dimming effect. Just
enter
NDC to signify NoDimColor.