Rose Electronics QuadraVista HDMI User Manual

Page 102

Installation and Operations Manual

9. Press the power switch On/Off to the ON position. The image

will be displayed on the monitor display.

10. Turn on the power or re-boot the connected first / second /

third / fourth computer systems

NOTE:

There is no need to re-boot the computer system(s) if you are

using the USB connection.

11. Press Ctrl + T on your keyboard to perform screen calibration

(when using your touch screen monitor with the QuadraVista
HDMI for the very first time, or upon resetting to the default
state). Use your finger tip or a stylus to tap and continue

pressing on the center of the

symbol that will appear on the

top left portion for approximately five (5) seconds until the

symbol appears on the top right portion. Perform the

same step for this, as well as the

symbol that would

appear on the lower left portion and lower right portion of your
monitor display.

12.

Upon completing screen calibration, the four windows will re-
appear on screen. Move the mouse or press the
Pause/Break key and you will see the mouse pointer on the
monitor display.