Rose Electronics Orion User Manual
Page 54
48
Orion Installation and Operations Manual
Appendix E – Programming Macros
This appendix describes the programming of switch macros. The macros will be stored for each console separately.
To activate these macros, you need a macro keyboard connected to one of the USB HID Ports on the Remote Unit.
To set-up the macros, select the option “Macro Keys” in the “Configuration” menu and press
The “Macro Keys” mask is displayed full screen as shown below
NOTE:
If you want to use Keyboard, mouse and macro keyboard simultaneously, you will need an extender kit with four
USB HID Ports or a USB Hub!
Field
Type
Description
No
Select
Number of the command (8 commands max)
Command
Select
Connect P1 to P2
Bidirectional Connection of CON Port P1 with CPU P2
Connect Video P1 to P2
Video Connection of CON Port P1 with CPU P2
Disconnect P1
Disconnect CON Port P1
Open P1 (cf. 7.1.3)
Open Configuration File P1
Save
Save current configuration inside the switch
Save As P1
Save current configuration in Configuration File P1
Logout
P1
VAL2
1) Number of CON Port (0 = own CON Port).
2) Number of Configuration File (0 = Default
P2
VAL2
1) Number of CPU Port to be connected with CON Port P1.