Rose Electronics Orion - Manual (Page 21)

Orion Installation and Operations Manual
15
User Matrix Configuration
Select the option “User Matrix” in the “Configuration” menu by using the cursor buttons and press .
The “User Matrix” mask is displayed full screen as shown is figure 10.
In this menu, the administrator can define for each user a specific set of CPU’s that this user is authorized to connect
to. If the option “User Matrix” is active, any switching requires the user to be logged in. Only then, switching by Hot
keys will be supported. The below example shows user #01 has access to CPU_01, CPU_02, and CPU_04.
To assign a user access to a CPU port, select the CPU port to assign and press . The CPU port will
highlight and the user has access to that CPU port.
Figure 10. User Matrix Menu
Key Control Description
Page up to previous user
Page down to next user
Move to left field
Move to right field
Line up
Line down
Next field
+ Previous field
Release selected CPU-Port for selected User
Apply and save data
Back to “Configuration” Menu
NOTE:
The User Matrix configuration and the Console Matrix configuration work together to grant access to a CPU port.
Both the User Matrix configuration for a user and the Console Matrix configuration must grant access to a CPU port.
If the User Matrix grants access to CPU port #2 but the Console Matrix does not grant access to CPU port #2,
access is denied.