Cross point switch mode (cpu mask) – Rose Electronics Orion User Manual
Page 36
30
Orion Installation and Operations Manual
Cross Point Switch Mode (CPU mask)
To enter the Crosspoint switch CPU mask, press the F1 key from the COM mask menu. The menu shown in
figure 21 will display.
Figure 21. Crosspoint Switch menu (CPU Mask)
Any number of monitors can be assigned to each CPU but only one keyboard/mouse
Keyboard Commands:
Cursor left
Select User Port to the left
Select User Port to the right
Line above
Select monitor for current CPU Port or
Select keyboard/mouse for CPU Port one line above
Select keyboard/mouse for current CPU Port or
Select monitor for CPU Port one line below
Confirm selected monitor AND keyboard/mouse assignment
(for CPU /User Port at cursor position).
Attention: Switch command is executed immediately
Confirm selected monitor OR keyboard/mouse assignment
(for CPU /User Port at cursor position).
Attention: Switch command is executed immediately
Switch to ‚CON Ports’ Mask
Return to Select Menu
The upper two lines show which
CON Port the video is attached.
The lower two lines show which
Console keyboard/mouse are
attached.
The rows correspond to the
32 CPU ports
(4 pages + with 8 ports each)
The columns correspond to the
16 CON Ports