RIGOL DSA1030 - Manual (Page 38)

RIGOL
24 Quick Guide for DSA1000 Series
User interface legends (Continued)
NO. Name Explanation
12 Menu item Menu item of current function.
13 Reference level Reference level.
14 Active area Current parameter and value.
15 Attenuator
settings Sets the Attenuator.
16 Display line Reading reference and threshold condition for
peak value.
17 Trigger level Sets the trigger level in video trigger.
18 Average times Average times of trace.
19 Cursor X Current value of Cursor X. Note that X indicates
different physical quantity in different functions.
20 Cursor Y
Current value of Cursor Y. Note that Y indicates
different physical quantity in different functions.
21 Invalid data Current measured data is invalid as a full sweep
didn’t complete after the system parameters have
been modified.
22 Menu pages Show total number of pages and current page
number.
23 Sweep position Current sweep position.
24 Sweep time Sweep time.
25 Span or stop
frequency The frequency range of current sweep channel
can be expressed by a combination of center
frequency and span or a combination of start
frequency and stop frequency.
26 Manual symbol Parameters non-auto coupling.
27 VBW Video resolution bandwidth.
28 Spectrum line
area For displaying spectrum line.