Disassemble the front panel cover, Adjust the supporting legs, Connect the power – RIGOL DSA1030 User Manual

Page 30

Text mode
Original mode

RIGOL

Quick Guide for DSA1000 Series

Disassemble the Front Panel Cover

Before putting your analyzer into action, remove the front panel cover by
releasing latches at both sides, and sliding in the direction of the arrows as
shown in the figure below.

Figure 14 Disassemble the front panel cover

Adjust the Supporting Legs

If necessary, adjust the supporting legs of the analyzer to an appropriately
position in the direction of the arrows as shown in the figure below.

Figure 15 Adjust the supporting legs

Connect the Power

The spectrum analyzer can use AC power or rechargeable battery (China only)
for power supply.