Retrotec Cloth Door Panel - Manual (Page 3)

gauge placement
Step 7: Replace the cloth panel
● Place the assembled cloth panel in the doorway.
● Loosen a black knob, extend the frame tight against
the door frame and re-tighten them one at a time.
Tip: Step on bottom of frame while securing the cams,
to ensure a tight fit.
Step 8: Engage cam levers
● Engage all cam levers to lock the frame into the
doorway.
● Tug on the frame to ensure a tight fit.
Double fan cloth (optional)
● Mount two fans with the optional two-fan cloth plus a
second crossbar.
QuickGuide Cloth Door Panel
Step 6: Attach the cloth panel
● Unfold the cloth panel and drape it over the frame.
● Attach the bottom Velcro tabs first, evenly along
the bottom of the frame.
Tip: Setting the frame on its side, or flat on the floor, will
make it easier to attach the cloth panel. Make sure the
black knobs and cams are still accessible once the panel
is attached.
● Fold the cloth panel over the
top, right and left of the frame.
● Connect the vertical and
horizontal Velcro strips to
secure the cloth.
● Make sure that the fan hole
is not stretched, or the
fan will not have a proper seal
when mounted in the
panel cloth.
3
Page 3 of 3
3
3