RISCO Group ProSYS, Interactive Voice Module - Manual (Page 38)

38
Voice Module Programming and Operations Manual
Receiving an Event Call
When you receive an event call from the system, the first thing you
must do is speak into the telephone handset in order to
acknowledge the system that you have received the call, and to
trigger the Event announcement message.
Simply picking up the phone and saying "Hello", or in fact anything, is
enough to do this.
NOTES:
If no voice is detected the event message will start playing 5 seconds after
phone pick up.
Interference noise on the telephone line might be recognized by the voice
module as a phone pick up and by that start playing the event message before
the phone has been picked up by you. Press # to begin playback of the event
message from the beginning.
Event Announcement
After you say "Hello", the Event announcement message is made, as
described on page 10.
TIPS:
To repeat the Event announcement message, press # .
To bypass the Event announcement message and go directly to the
Acknowledge
menu, press
*
.