RISCO Group ProSYS, Interactive Voice Module - Manual (Page 16)

16
Voice Module Programming and Operations Manual
Verifying Communication
*
9 CODE # 4 3
You can verify the communication between the Voice module and
a remote FM telephone, and between the Voice module and a
local Message Box Unit (MBU). The options in this section are used
mainly by your installer.
Verifying Remote Communication
*
9 CODE # 4 3 1
Remote communication is verified by sending a Test event message
from the ProSYS to a selected FM number. In order to achieve this, a
phone number must first be assigned to the relevant FM number by
entering [ ][2][CODE][#][7], as described in the ProSYS User's
Manual, Chapter 6: Setting Follow Me Numbers.
To verify remote communication:
1.
VOICE MESSAGE:
1) MSG. STRUCTURE
VOICE MESSAGE:
1) MSG. STRUCTURE
From the
Voice Message
menu, select
[3]
Test Message
.
2.
TEST MESSAGE:
01) SEND MESSAGE
TEST MESSAGE:
01) SEND MESSAGE
Select
[01] Send Message
.
3.
SEND MESSAGE:
01) FM NUM 1
SEND MESSAGE:
01) FM NUM 1
Select the FM number to which you want a
test message to be sent.
4.
VOICE FM TEST
ACTIVATED
VOICE FM TEST
ACTIVATED
The system calls the selected FM number and
announces the following message:
Test message.
The Acknowledge menu is then announced, as described on
page 39.