RISCO Group ProSYS Version 7.xx User Manual

Page 16

ProSYS Version 7.XX - Supplementary Instructions

Quick Keys Parameter

Default

Range

[5][0][4][2] IP Secondary

00360 (x10
sec)

0-65535 sec

Defines the polling interval through the secondary channel. When
using the default time, a polling message is sent every 3600 seconds
(1 hour).
When the IP Secondary polling time is defined as 0, no polling
message is sent to the MS (when the MS channel is in the Secondary
polling mode).

[5][0][4][3] IP Backup

00003 (x10
sec)

0-65535 sec

Defines the polling interval through the backup channel. When using
the default time, a polling message is sent every 30 seconds.
When the IP Backup polling time is defined as 0, no polling message
is sent to the MS (when the MS channel is in the Backup polling
mode).

Quick Keys Parameter

Default

Range

[8][3][1][5]
[4]

MS Polling through GPRS

GPRS Primary

This parameter checks connectivity between RISCO Group's IP/GSM
Receiver software and the ProSYS panel by sending polling signals
from the ProSYS GSM via the GPRS channel. Ensure that the GPRS
channel has been configured properly in the IP/GSM Receiver
software.
For additional information, refer to the above description that appears
for MS Polling through IP network.

Note:

The only difference from the above explanation (MS Polling by IP) is that the
default time intervals for Primary and Backup in MS Polling through GPRS are
defined as 9 (90 seconds).

MS Polling example:

When selecting MS#1 IP(ACM), MS#2 GPRS (GSM) and split report option 1st
BKUP 2ND (using the default primary, secondary and backup values), the report
process will be as follows:
In a normal state:
Polling through the IP network using the ACM will occur every 30 seconds
according to the primary time interval.
Polling through the GPRS network using the GSM module will occur every 3600
seconds (1 hour) according to secondary time interval.
When communication to MS#1 (ACM) fails, polling through the GPRS network
occurs every 90 seconds according to the backup time interval. When
communication returns to MS#1, polling through the GPRS network reverts back
to the secondary time interval and occurs every 3600 seconds (1 hour).

5IN1181 C